DEEP EXCAVATION & UNDERGROUND WORKS
Deep Excavation & Underground Monitoring
Monitor retaining systems, ground movement, groundwater and adjacent assets through construction-stage instrumentation and engineering data review.
Excavation and lateral support
Understand the ground–structure interaction
Deep excavation projects place retaining systems, temporary supports, groundwater conditions and surrounding assets into a changing engineering environment. Excavation sequence, dewatering, ground variability and construction workmanship can all influence movement and performance.
A robust monitoring arrangement should be developed alongside the excavation design and construction method. It should help the project team check whether measured behaviour is consistent with the design assumptions and whether further review or action is required.
Wall movement and support response
Observe lateral deformation and, where specified, the loads or strains in critical support elements.
Drawdown and pore pressure
Track groundwater response and identify changes that may influence excavation stability or nearby ground conditions.
Settlement and structural response
Monitor selected buildings, roads, utilities and structures that may be affected by the works.
GEOOE’s related application areas include Excavation and Retaining Structures (ERSS), ground movement, subsidence and tunnel monitoring.
What can change during excavation
The main mechanisms to consider
Retaining wall deformation
Wall deflection and ground movement may evolve as excavation proceeds and support levels are installed, preloaded or altered.
Groundwater drawdown
Pumping and groundwater inflow can change pore pressures and may affect adjacent ground or structures, depending on geology and hydraulic connectivity.
Support loads and strains
Struts, anchors and other critical support elements may experience changing loads during staged excavation and construction.
Movement of nearby assets
Settlement, tilt, cracking or vibration may affect adjacent buildings, roads, buried services and sensitive receivers.
The Hong Kong Geotechnical Engineering Office’s Deep Excavation Design and Construction (GEO Publication No. 1/2023) discusses instrumentation for excavation and lateral support works, including movement and vibration of sensitive receivers, groundwater level and piezometric pressure, embedded-wall deflection, and loads or strains in critical support elements.
Select instruments by measurement objective
Instrumentation for deep excavation monitoring
The following methods are commonly considered for excavation monitoring. Final instrument types, locations, installation details, frequency and acceptance criteria must follow the project design and applicable requirements.
| Measurement objective | Typical instrument or method | What the data helps assess |
|---|---|---|
| Subsurface horizontal deformation | Inclinometers | Movement profile with depth and changes associated with excavation stages. |
| Groundwater level | Standpipes | Groundwater level trends and potential drawdown response. |
| Pore-water pressure | Vibrating-wire piezometers | Pore-pressure changes in selected geological strata or response zones. |
| Surface settlement and displacement | Survey markers and precise/automated survey methods | Movement of the ground surface and selected surrounding assets. |
| Structural crack or tilt | Crackmeters and tiltmeters | Changes in selected crack widths or orientation/tilt at monitored structures. |
| Support-system performance | Load or strain instrumentation where specified | Changes in loads or strains in critical struts, anchors or structural elements. |
Instrument selection should consider measurement accuracy, reliability, response time, site conditions, installation constraints and maintainability. For groundwater monitoring, the response zone and geological layer matter: a sensor installed in the wrong stratum may not represent the hydraulic condition relevant to the excavation.
Explore GEOOE’s geotechnical instrumentation, ground monitoring and structural monitoring technical areas.
Construction-stage control
A monitoring workflow that follows excavation sequence
Review the design basis
Understand the ground model, excavation geometry, support system, dewatering plan and surrounding assets.
Establish baseline data
Install and verify instruments, confirm reference points and obtain baseline observations before relevant works.
Align with work stages
Plan measurement frequency around excavation depth, support installation, preload, pumping and other critical activities.
Review and respond
Check data quality, compare trends with design expectations and follow the approved trigger and action plan.
A monitoring programme is most useful when readings can be interpreted against the construction record. The timing of excavation, strut installation, groundwater pumping and nearby works should be traceable alongside the measurements.
- Defined instrument locations and identifiers
- Documented baseline and reference conditions
- Calibration and installation records
- Consistent units, timestamps and survey references
- Construction-stage and event logs
- Agreed review, notification and escalation responsibilities
Reliable readings before interpretation
Data quality, reporting and engineering review
A measurement is only useful when its origin, method, timing and quality are understood. Monitoring data should be checked before it is compared with trigger levels or used to support a construction decision.
Traceability
Maintain instrument IDs, location references, installation records, calibration details, operator records and timestamps.
Quality assurance
Identify missing values, outliers, drift, inconsistent units, survey-reference changes and instrument faults.
Engineering interpretation
Read trends in the context of construction stages, ground conditions, rainfall, groundwater and nearby activities.
Thresholds should be established by the responsible project professionals and linked to specific actions. A dashboard or alert is not a substitute for checking the measurement, understanding the mechanism and confirming who is responsible for the response.
For further technical reading, visit the GEOOE Technical Hub and the automated monitoring systems page.
GEOOE engineering perspective
An instrumentation-led approach to excavation data
GEOOE focuses on geotechnical instrumentation, infrastructure sensing and engineering intelligence. For deep excavation projects, this means connecting instrument selection and monitoring architecture with the actual engineering questions: wall behaviour, groundwater response, support performance and movement of surrounding assets.
Instrumentation and monitoring systems
Explore the instrumentation platform, including ground and structural monitoring and automated monitoring topics.
Subsurface investigation and interpretation
Connect monitoring questions with soil investigation and geophysical survey information where these methods are relevant to the project.
The required scope, deliverables, professional responsibilities and any independent review appointment must be agreed for each project. GEOOE does not imply that a general website description replaces the project’s appointed registered professionals or statutory approvals.
Common questions
Deep excavation monitoring FAQs
Which instrument is used to monitor retaining-wall movement?
Why may more than one groundwater instrument be needed?
Should monitoring frequency remain constant throughout excavation?
Can a monitoring dashboard determine whether excavation is safe?
Official information
Hong Kong technical and regulatory references
- CEDD — GEO Publication No. 1/2023: Deep Excavation Design and ConstructionHong Kong technical publication covering excavation and lateral support design, construction and instrumentation considerations.
- GEO Publication No. 1/2023 — Full documentTechnical reference discussing instruments for movement, vibration, groundwater, wall deflection and support-system loads or strains.
- Buildings Department — Practice Notes for AP, RSE and RGEOfficial practice notes, including requirements relevant to excavation and lateral support plans.
- CEDD — GeoguidesOfficial geotechnical guidance publications, including site investigation and retaining-wall design.
Always consult the latest editions, amendments, approved drawings and project specifications. This page is general engineering information and is not a project-specific design or approval.
Discuss a project
Share the excavation and monitoring requirements
For a deep excavation enquiry, share the excavation depth and sequence, retaining system, ground and groundwater information, nearby assets, proposed instruments and any existing monitoring requirements.
Business enquiries: [email protected]